'30' Series Temperature Programmers

With the introduction of the '30' series of digital temperature controller / programmers, Fast Heat brings quality digital temperature pogrammers within the reach of most applications. Each of the three controllers in the range offer heat and cool output channels plus two independant alarm outputs.

Each unit has the capability to store 2 programs of 8 steps each, where each step consists of a ramp and dwell segment. Each program can be controlled externally or from the front panel. Also each program can be run on its own or continuously.

All the '30' Series controllers are now available for operation from a 24V supply for intrinsically safe control panels.

VT9630

VT4930

VT4830

Size: 96 x 96 x 90mm

Size: 48 x 96 x 90mm

Size: 48 x 48 x 106mm

Technical Specification

Value

Input / Display

Accuracy

Thermocouple = ± 1^oC, PRT = ± 0.2^oC

CJC

0.1^oC / C ambient

Update Time

500 mS

Noise Rejection

120dB

Input Types

The '30' series controllers are supplied pre-configured to either type 'J' thermocouple or DIN PRT 100 input. Changing to another thermocouple or PRT input is simply accomplished by following the information supplied in the accompanying operating manual.

Please contact the factory for available linear inputs.

Input Type	Range (C)	Range (F)
J	-50 to 1000	-58 to 1832
K	-50 to 1370	-58 to 2498
T	-270 to 400	-454 to 752
E	-50 to 1000	-58 to 1832
B	0 to 1800	32 to 3272
R	-50 to 1750	-58 to 3182
S	-50 to 1750	-58 to 3182
N	-50 to 1750	-58 to 2372
C	-50 to 1800	-58 to 3272
DIN PRT 100	-200 to 850	-328 to 1652
JIS PRT 100	-200 to 600	-328 to 1112
Linear	-1999 to 9999	-1999 to 9999

Display Range

Software selectable from preset table of ranges

Program

2 x 8 Step Programs, each step = ramp + dwell

Case Sealing

IP63

Output

Display

4 digit, high brightness, red LED's

Output Relay

10A @ 240V ac into a resistive loads. A 3A maximum is recommended for inductive loads. (1 x 10e7 Operations)

Output Logic

24V On, less than 4V Off (100mA Max)

Alarm Relay

10A @ 240V ac into a resistive loads. A 3A maximum is recommended for inductive loads. (1 x 10e7 Operations)

Power

Power Usage

< 3VA

Power Supply

90 - 264V ac, 50/60 Hz, 18 - 32V ac/dc 50/60Hz

Operating Temperature

0 to +50^oC

Product Codes

The codes given below are for standard items kept in stock. Please contact the factory for any controllers required with linear inputs.

Please add '-24V' to any code for controllers that are required to run from 24V. e.g. VT4830-TLR-24V.

Product Code	Controller	Input Type	Heat O/P Type	Cool O/P Type
VT4830-DLL	VT4830	DIN PRT 100	Logic	Logic
VT4830-DLN	VT4830	DIN PRT 100	Logic	None
VT4830-DRL	VT4830	DIN PRT 100	Relay	Logic
VT4830-DRN	VT4830	DIN PRT 100	Relay	None
VT4830-TLL	VT4830	Thermocouple	Logic	Logic
VT4830-TLN	VT4830	Thermocouple	Logic	None
VT4830-TRL	VT4830	Thermocouple	Relay	Logic
VT4830-TRN	VT4830	Thermocouple	Relay	None
VT4930-DLL	VT4930	DIN PRT 100	Logic	Logic
VT4930-DLN	VT4930	DIN PRT 100	Logic	None
VT4930-DRL	VT4930	DIN PRT 100	Relay	Logic
VT4930-DRN	VT4930	DIN PRT 100	Relay	None
VT4930-TLL	VT4930	Thermocouple	Logic	Logic
VT4930-TLN	VT4930	Thermocouple	Logic	None
VT4930-TRL	VT4930	Thermocouple	Relay	Logic
VT4930-TRN	VT4930	Thermocouple	Relay	None
VT9630-DLL	VT9630	DIN PRT 100	Logic	Logic
VT9630-DLN	VT9630	DIN PRT 100	Logic	None
VT9630-DRL	VT9630	DIN PRT 100	Relay	Logic
VT9630-DRN	VT9630	DIN PRT 100	Relay	None
VT9630-TLL	VT9630	Thermocouple	Logic	Logic
VT9630-TLN	VT9630	Thermocouple	Logic	None
VT9630-TRL	VT9630	Thermocouple	Relay	Logic
VT9630-TRN	VT9630	Thermocouple	Relay	None

Top - Home - Contact Us