'10' Series Temperature Controllers

The '10' Series temperature controllers from Fast Heat are simple-to-operate, low-cost controllers ideal for most temperature controllers. Each of the four controllers in the range offers heat output and one or two independant alarm outputs. Auto Tune is provided as standard as is the ability to run in manual mode with the user selecting the output power. The '10' series also offers a ramp facility to reduce over-heating of the heaters.

All the '10' Series controllers are now available for operation from a 24V supply for intrinsically safe control panels.

NEW VT7210 72mm x 72mm controller.

VT9610

VT9410

VT4910

VT4810

VT7210

Size: 96 x 96 x 90mm

Size: 96 x 48 x 90mm

Size: 48 x 96 x 90mm

Size: 48 x 48 x 106mm

Size: 72 x 72 x 90mm

Technical Specification

Value

Input / Display

Accuracy

Thermocouple = ± 1^oC, PRT = ± 0.2^oC

CJC

0.1^oC / ^oC ambient

Update Time

500 mS

Noise Rejection

110dB

Input Types

The '10' series controllers are supplied pre-configured to either type 'J' thermocouple or DIN PRT 100 input. Changing to another thermocouple or PRT input is simply accomplished by following information supplied in the accompanying operating manual.

Please contact the factory for available linear inputs.

Input Type	Range (C)	Range (F)
J	-50 to 1000	-58 to 1832
K	-50 to 1370	-58 to 2498
T	-270 to 400	-454 to 752
E	-50 to 750	-58 to 1380
B	0 to 1800	32 to 3272
R	0 to 1750	32 to 3182
S	0 to 1750	32 to 3182
N	-50 to 1300	-58 to 2372
DIN PRT 100	-200 to 500	-328 to 932
JIS PRT 100	-200 to 500	-328 to 932
Linear	-1999 to 9999	-1999 to 9999

Case Sealing

IP63

Output

Display

4 digit, red LED display of measured value. 4 digit, green LED display of setpoint.

Output Relay

10A @ 240V ac into a resisitive load. A 3A maximum is recommended for inductive loads. (1 x 10e7 Operations)

Output Logic

24V On, less than 4V Off (100mA Max). Suitable for driving most types of Solid State Relay (SSR).

Alarm Relay

All '10' series controllers are supplied with fitted alarm relays (relay in the case of the VT4810). These are rated at 10A @ 240V ac into a resistive load. A 3A maximum is recommended for inductive loads. (1 x 10e7 Operations)

Power

Power Usage

Less than 5VA

Power Supply

85 - 265V ac, 50/60 Hz or 18 - 32V dc/ac 50/60Hz

Operating Temperature

0C to +50^oC

Product Codes

The codes given below are for standard items kept in stock. Please contact the factory for any controllers required with linear inputs.

Please add '-24V' to any code for controllers that are required to run from 24V. e.g. VT4810-TL-24V.

Product Code	Controller	Input Type	Heat O/P Type
VT4810-DL	VT4810	DIN PRT 100	Logic
VT4810-DR	VT4810	DIN PRT 100	Relay
VT4810-TL	VT4810	Thermocouple	Logic
VT4810-TR	VT4810	Thermocouple	Relay
VT4910-DL	VT4910	DIN PRT 100	Logic
VT4910-DR	VT4910	DIN PRT 100	Relay
VT4910-TL	VT4910	Thermocouple	Logic
VT4810-TR	VT4810	Thermocouple	Relay
VT7210-DL	VT7210	DIN PRT 100	Logic
VT7210-DR	VT7210	DIN PRT 100	Relay
VT7210-TL	VT7210	Thermocouple	Logic
VT7210-TR	VT7210	Thermocouple	Relay
VT9410-DL	VT9410	DIN PRT 100	Logic
VT9410-DR	VT9410	DIN PRT 100	Relay
VT9410-TL	VT9410	Thermocouple	Logic
VT9410-TR	VT9410	Thermocouple	Relay
VT9610-DL	VT9610	DIN PRT 100	Logic
VT9610-DR	VT9610	DIN PRT 100	Relay
VT9610-TL	VT9610	Thermocouple	Logic
VT9610-TR	VT9610	Thermocouple	Relay

Top - Home - Contact Us