Vid-O Water Drainage System

The Vid-O tool water cleaning and purging system connects to the flow meter on your press to enable easy purging of the water and debris when preparing a tool for removal, or when the tool is not in production.

The Vid-O has three modes of operation:-

• 'Off' mode, the Vid-O prevents the flow of water into the tool in preparation for tool removal or fitting.
• Moving the handle to the 'Normal' mode allows the water to flow into the tool as normal.
• When it is required to purge the tool, the handle is moved to the 'Purge' position allowing high pressure air to be fed into the tool and the remaining water and debris is force fed to the drain of the Vid-O system.

Technical Specification

Value

Dimensions

190 x 150 x 150mm (l x h x d)

Weight

7.5kg

Flow Capacity

24m³/h

Connection Diameters

Water In = 1” G

Water Out = 1” G

Air In = 3/8”G

To Flow Meter = 1” G

Flow Meter Return = 1” G

Water Drain = 3/8” G

(G = British Standard Pipe Threads)

Air Pressure

5.0 - 7.0bar (80 - 100psi)

Maximum Temperature

90^oC (200^oF)

Ordering Information

Part Number

Vid-O-Plan-A (Handle = Left, Mounting = Direct)

Vid-O-Plan-B (Handle =Left, Mounting = Indirect)

Vid-O-Plan-C (Handle = Right, Mounting = Direct)

Vid-O-Plan-D (Handle = Right, Mounting = Indirect)

Flowmeter Compatibility

Wittmann Series: 101/301

Direct fit, no adapter needed.

Wittmann Series: 300

Kit AW 500/600 Required.

Wittmann Series: 400

Kit AW 400 required.

Wittmann Series: 500/600

Kit AW 500/600 required.

Plastic Services: Series FSML

Direct fit, no adapter needed.

Haas: 1000/1100

Kit AW 500/600 Required.

Haas: 3000/3100

Kit AW 500/600 Required.

Sella

Kit AS Required.